FAAC 746C
230VReplaces the 746For sliding gates up to 600kg.
- Gate weight
- up to 600kg
- Speed
- 9.6–12 m/min
- Use
- continuous
- Protection
- IP44
FAAC sliding gate operators.
FE Automation supplies four FAAC sliding gate gearmotors in Singapore, for gates from 600kg to 3,500kg. Two run on single-phase 230V power; two are three-phase for industrial sites.
Single-phase (230V)
FAAC 844C
230VReplaces the 844For heavier sliding gates, up to 1,800kg.
- Gate weight
- up to 1,800kg
- Speed
- 9.6 m/min
- Force
- 1,300N
- Protection
- IP44
Three-phase
FAAC 844 ER 3PH
400V three-phaseOil-bath clutchFor sites with three-phase power and gates up to 2,200kg.
- Gate weight
- up to 2,200kg
- Force
- up to 2,500N
- Use
- 70%
- Protection
- IP44
FAAC 884
400V three-phaseIndustrialFor the heaviest industrial gates, up to 3,500kg.
- Gate weight
- up to 3,500kg
- Force
- up to 3,200N
- Torque
- 0–155Nm
- Protection
- IP55
Which FAAC sliding gate operator do I need?
Start with the gate's weight, then the power supply on site.
- FAAC 746C
- Up to 600kg · Single-phase (230V)
- FAAC 844C
- Up to 1,800kg · Single-phase (230V)
- FAAC 844 ER 3PH
- Up to 2,200kg · Three-phase
- FAAC 884
- Up to 3,500kg · Three-phase
Not sure? Tell our team the gate's weight and the power supply on site, and we'll confirm.
Looking for the FAAC 746 or 844?
FE Automation now supplies the FAAC 746C in place of the 746, and the FAAC 844C in place of the 844. Both come with FAAC's E781 control board built in.
Swing, sliding or barrier?
- Swing gates
- Open on hinges. They need clear space for the leaves to swing into.
- Sliding gatesYou're here
- Run along a track beside the opening, so they don't need space to swing.
- Barriers
- A single boom that lifts to control vehicle access. Not for closing off a property.
Need rollers for the gate itself? See Comunello gate rollers
Can I get a recommendation without knowing the FAAC model code?
Yes. Tell our team whether your gate swings or slides, and roughly how wide and heavy it is. We'll point you to the FAAC operator that fits, and the datasheet your installer will need.