FAAC 844C Sliding gate gearmotor, 230V
- Up to 1,800kg
- Built-in control board
- Continuous use
- IP44
The FAAC 844C is a 230V sliding gate gearmotor for gates up to 1,800kg, with FAAC's E781 control board built in. FE Automation supplies it in Singapore in place of the FAAC 844, with supplier warranty.
Homeowners: you don't need the model code. Tell our team your gate's width and weight and we'll confirm the right version.
Looking for the FAAC 844?
The 844C is the version FE Automation now supplies instead of the 844. On a site with three-phase power, see the FAAC 844 ER 3PH, for gates up to 2,200kg.
FAAC 844C specifications
| Spec | FAAC 844 C Z16 |
|---|---|
| Power supply | 220–240V~ 50/60Hz |
| Max power | 230 W |
| Pinion | Z16 module 4 |
| Max force | 1,300 N |
| Max gate weight | 1,800 kg |
| Max speed | 9.6 m/min |
| Max leaf length | 40 m |
| Stopping space | 30 mm |
| Thrust capacitor | 18 µF |
| Operating temperature | -20°C to +55°C* |
| Thermal protection | 120°C, automatic reset |
| Protection class | IP44 |
| Use frequency | Continuous use |
| Weight | 16.9 kg |
*Can run at +55°C to +65°C at 28 cycles/hr and 400mA accessory load. Cycle figures are for a 5m-wide gate at maximum weight.
What the FAAC 844C does well
- E781 control board built in, with adjustable speed.
- Two dedicated safety-edge inputs (NC or 8.2kΩ) and Bus2Easy.
- High-resolution encoder: smoother starts and stops, adjustable obstacle sensitivity.
