FAAC 746C Sliding gate gearmotor, 230V
- Up to 600kg
- Built-in control board
- Continuous use
- IP44
The FAAC 746C is a 230V sliding gate gearmotor for gates up to 600kg, with FAAC's E781 control board built in. FE Automation supplies it in Singapore in place of the FAAC 746, with supplier warranty.
Homeowners: you don't need the model code. Tell our team your gate's width and weight and we'll confirm the right version.
Looking for the FAAC 746?
The 746C is the version FE Automation now supplies instead of the 746. It has the E781 control board built in, a high-resolution encoder for smoother starts and stops, and adjustable obstacle sensitivity.
Z16 or Z20?
The Z16 moves heavier gates: up to 600kg at 9.6 m/min. The Z20 is faster, at 12 m/min, for gates up to 400kg.
FAAC 746C specifications
Common to both:
- 220–240V~ 50/60Hz
- 150W max power
- 30mm stopping space
- 12.5µF thrust capacitor
- -20°C to +55°C**
- 120°C thermal protection, automatic reset
- IP44
- Continuous use
| Version | Pinion | Max gate weight | Max speed | Max force | Max leaf length | Weight |
|---|---|---|---|---|---|---|
| 746 C Z16 | Z16 module 4 | 600 kg | 9.6 m/min | 830 N | 40 m | 16.2 kg |
| 746 C Z20 | Z20 module 4 | 400 kg | 12 m/min | 665 N | 50 m | 16.5 kg |
**Can run at +55°C to +65°C at reduced use (28 cycles/hr Z16, 36 cycles/hr Z20) and 400mA accessory load. Cycle figures are for a 5m-wide gate at maximum weight.
What the FAAC 746C does well
- E781 control board built in, with adjustable speed.
- Two dedicated safety-edge inputs (NC or 8.2kΩ) and Bus2Easy.
- High-resolution encoder: smoother starts and stops, lower consumption, adjustable obstacle sensitivity.
