FAAC 844 ER 3PH Three-phase sliding gate gearmotor, 400V
- Up to 2,200kg
- 400V three-phase
- Oil-bath clutch
- IP44
The FAAC 844 ER 3PH is a 400V three-phase sliding gate gearmotor for gates up to 2,200kg, with a twin-disk oil-bath clutch. FE Automation supplies it in Singapore, with supplier warranty, for sites with three-phase power.
Homeowners: you don't need the model code. Tell our team your gate's width and weight and we'll confirm the right version.
844 ER 3PH or 844C?
Check the power supply first. The 844 ER 3PH needs three-phase power (380–415V) and moves gates up to 2,200kg. The 844C runs on single-phase 230V, for gates up to 1,800kg.
FAAC 844 ER 3PH specifications
| Spec | FAAC 844 ER 3PH |
|---|---|
| Power supply | 380–415V~ three-phase, 50/60Hz |
| Motor | Asynchronous three-phase |
| Max power | 950 W |
| Max torque | 62 Nm* |
| Max force | 2,500 N (Z12) · 1,900 N (Z16) · 1,500 N (Z20)* |
| Max gate weight | 2,200 kg (Z12) · 1,600 kg (Z16) |
| Max leaf length | 40 m (Z16) · 50 m (Z20) |
| Reduction ratio | 1:30 |
| Speed adjustment | No (fixed speed) |
| Force adjustment | Twin-disk clutch in oil bath |
| Limit switch | Inductive, with metal sheet |
| Thermal protection | 155°C |
| Protection class | IP44 |
| Operating temperature | -20°C to +55°C |
| Use frequency | 70% |
| Weight | 15 kg |
| Dimensions (LxDxH) | 277 x 155 x 388 mm |
*At 400V~ 50Hz.
What the FAAC 844 ER 3PH does well
- Built-in E844 3PH control board with encoder control and smooth starts and stops.
- Anti-crushing safety from the oil-bath clutch working with the electronics and encoder.
- Inductive limit switch.
- Height- and side-adjustable fixing.
